Private Forums
All discussions in Drilling Operations
Discussions
Discussion Subject:


Subject ▲ Posted By ▼ Group ▼ Last Active ▼ Replies ▼
Drilling and cementing practic... Bruce Richardson Drilling Operations 30 May 2013 1
Drill Bits Selection Benjamin Arawore Drilling Operations 04 June 2013 0
36″ Hole (Stab & X/Over) Iain MacLeod Drilling Operations 09 November 2013 2
Tripping - "Manual Derricks" Allan Wilson Drilling Operations 16 December 2013 6
Cellar pump Rajiv Tikkoo Drilling Operations 30 March 2014 7
Annular Pressure (9 5/8" x 7") ZIANI Said Drilling Operations 15 May 2015 13
Drilling dolerite Dave Taylor - SPREAD Moderator Drilling Operations 08 November 2015 7
Losses with Mud pumps off ZIANI Said Drilling Operations 17 November 2014 2
Index Line Sam Yap Drilling Operations 01 December 2014 4
Expert Training Support Offer... Iain Hutchison Drilling Operations 19 February 2015 0
Solutions to surface collision... Bhushan Salve Drilling Operations 27 March 2015 8
Strength caging in Geomechanic... Grahame Osgood Drilling Operations 20 April 2015 4
Hole cleaning in 12-1/4" secti... Grahame Osgood Drilling Operations 19 April 2015 5
Which Azimuth for Horizontal W... ZIANI Said Drilling Operations 15 August 2015 4
CHS and CHH ZIANI Said Drilling Operations 20 August 2015 4
Strap-welding 36" bit Dave Taylor - SPREAD Moderator Drilling Operations 12 October 2015 11
Estimating bit torque Venkat Chitor Drilling Operations 19 March 2016 0
Bit Torque estimation Venkat Chitor Drilling Operations 19 January 2016 16
DP Buckling Venkat Chitor Drilling Operations 15 December 2015 5
Surface Torque maxing out Venkat Chitor Drilling Operations 19 December 2015 6