DISCUSSIONS

Unanswered
SUBJECT POSTED BY GROUP LAST ACTIVE REPLIES
Tubing pressure test Mohammed Ali Workover 11 May 2021 9
Land-rig: Landing surface casing on 'H' beams to save WOC Dave Taylor - SPREAD Moderator Cementing 30 October 2021 9
Cutting 9-5/8" with wireline-conveyed tools Dave Taylor - SPREAD Moderator Abandonments (facilities and/or wells) 26 October 2021 9
Pros and Cons of Shark Bite Dave Taylor - SPREAD Moderator Casing & Liners 15 January 2022 9
Stick -slip problem. Vinod Mahadik Drill String Design 11 May 2021 9
Effect of oil base mud on PDC bits wear and Dull compared to water base mud Ahmed Abdelhamid Drilling Fluids 11 May 2021 9
Where to cut 9 5/8″ Casing Mike Fraser Abandonments (facilities and/or wells) 11 May 2021 9
High connection gases during drilling but low pore pressures from wireine(post drilling). Chike Nwagu HTHP 11 May 2021 9
Platform Conductor Fatigue Study Ed Appleton Casing & Liners 11 May 2021 9
University Research into Training for the Offshore Drilling Industry Callum Christie Training and Competency 11 May 2021 9
With this down turn in our industry are multilaterals a useful well construction technique to reduce costs? Ken Horne. General discussions 01 July 2025 9
Shooting nipples Peter Aird Completion 11 May 2021 9
PS30 Slip Carrier Lost in Hole Myles Barrett General discussions 11 May 2021 9
Green cement pressure test with stinger cementation Claudio Virgilio Cementing 11 May 2021 9
Rig substructure loads Askhat Burlibayev Drilling Equipment 11 May 2021 9
Section Mill - Or - Perf, Wash & Squeeze? Jamie Stewart Abandonments (facilities and/or wells) 11 May 2021 9
Using Annular BOP for WL operations Askhat Burlibayev Well Control 11 May 2021 9
Milling of Weatherford DDV Umair Ahmed Baig Milling 11 May 2021 9
NPT and (K)ILT coding, definitions and guidance Dave Taylor - SPREAD Moderator Performance 11 May 2021 9
18 3/4" BOP on 13 5/8" Wellhead on Jack-up Himanshu Patel General discussions 11 May 2021 9