Ptressure testing of casing cementesd with inner string

06 February 2020 We have lowered a 18-5/8 casing to a depth of 8500 ft and cemented the casing with inner string. The shoe track of the casing is a single joint of casing with stab in flaot collar at 40 ft above the shoe.

The plan is to RIH with 16 '' bit upto stab in float collar and  pressure test the casing with 8.9 ppg water based mud to 4000 psi . Drill out stab in float collar and 15 ft of cement and retest the casing to 4000 psi. The fracture gradient at shoe is approx. 3200 psi. I am not in agreement with pressure testing the casing to 4000 psi after drilling out the stab in float collar and cement.with just 25 ft of grey cement for a high possibility of communication and breaking the formation at shoe. My suggestion is to pr.test  upto 3100 psi (required FIT is to a pressure of 3000 psi). Any other suggestions
1 Answer(s)

Support Spread

We need the support of our members to keep our forum online. If you find the information on spread useful please consider a donation

donate