Discussion Forum > Abandonments (facilities and/or wells) > Cutting 9-5/8" with wireline-conveyed tools

Cutting 9-5/8" with wireline-conveyed tools

19 October 2021

Dear all

At a recent Slot Recovery break-out session (in our 50th online workshop), the topics of wireline-conveyed cutters came up.

Is anyone aware of equipment that can be run on wireline and used to cut conventional grade and wall-thickness 9-5/8" casing?  If so, please share your knowledge with our members.

Thanks and kind regards

Dave

9 Answer(s)
Support Spread

We need the support of our members to keep our forum online. If you find the information on spread useful please consider a donation

donate

Posted by

Dave Taylor - SPREAD Moderator

Dave Taylor - SPREAD Moderator

Managing Director (rp-squared.com)

Relentless Pursuit Of Perfection Ltd.

Discussions: 226

Replies: 338

Related Discussions
Relying on shales as annulus barriers
Cement Plugs in CaBr enviromental
Pump and Pull techniques, high angle wellbores.
Well Abandonment - Control Lines
abandonment work
drillers.com rp2