Private Forums
Cementing Consultants
20 September 2010
Hello All,

In our HTHP geothermal project we have some very difficult challenges in cementing including slurry design, placement techniques and long term integrity. To date we have dealt directly with single cement vendors but are always limited to what their product range offers and so far have had quite poor results. We are looking for an independent cement expert with both service company and opearator experience and a wide range of contacts to work with us to find solutions industry wide. Does anyone know anyone or any consulting organisations that may be able to help?

Cheers!
6 answer(s)
cementspecialist
SPREADAssociates
Total Posts: 5
Join Date: 24/09/10
I've got experience in this and will help. Former service company, currently global cement specialist for operator. Experience with geothermal/steam cement and well integrity issues.

Mike Cowan
[email protected]
rdajani
Hess Corporation
Total Posts: 2
Join Date: 30/09/10
Shak,

I can put u in touch with a global cementing specialist / advisor working for an operator. I would be glad to help
Companyrep
Drilling Specialist/Well Engineer/Training Consultant
SPREADAssociates
Total Posts: 339
Join Date: 10/01/05
Some guidelines from way back, that were compiled as attached that may help/assist. I am sure most still apply when it comes to HPHT cement considerations.

Success.

Peter Aird
Documents uploaded by user:
07 HPHT cementing guidlines.pdf
John_Thorogood
SPREADAssociates
Total Posts: 8
Join Date: 03/07/10
Shak:
Please contact me directly. I can put you in touch with an ex-Shell 40-year experienced drilling engineer that did a lot of geothermal work and has cementing horror stories to match. Just not at liberty to post his details indiscriminately.
John Thorogood
[email protected]
rcaenn
Consultant
SPREADAssociates
Total Posts: 7
Join Date: 06/08/09
Contact CSI - Fred Sabins ([email protected]) or David Brown ([email protected]) at Cementing Solutions (www.CSI-Tech.net).
PaulHowlett
CEO
Sudelac
Total Posts: 80
Join Date: 10/04/08
Shak, contact me directly I may be able to assist you. regards [email protected]
Jump to top of the page