My-Spread Forum | Capstan Cover Plate Retaining Bolts - may not be compliant with DROPS best practice

Discussion Forum > HSE > Capstan Cover Plate Retaining Bolts - may not be compliant with DROPS best practice

Capstan Cover Plate Retaining Bolts - may not be compliant with DROPS best practice

02 January 2018

Dear members

At a recent After Action Review, it was highlighted that the capstan cover plate retaining bolts were not compliant with the Drilling Co (Stena) requirements and DROPS best practices.

The immediate action was to replace the bolts with the NordLock design (locking design)

The Wireline Co has raised a technical request & is discussing with the Capstan OEM (Zonepower).

You might want to check the equipment that you are using and add to your DROPS checklists.

I hope this helps and "hats off to the observant Toolpusher at Stena Drilling".

Kind regards

Dave

0 answer(s)

Posted by

Dave Taylor - SPREAD Moderator

Managing Director (rp-squared.com)

Relentless Pursuit Of Perfection Ltd.

Total Posts: 416

Related Discussions

Cemen not bonded properly Subsea BOP Pressure Testing - Leak at Low but not Hi Pressure Why is there not more Loss circulation in IWCF, Wellcap IADC training programs etc? Severing Drill Pipe - pipe not in tension

Jump to top of the page