DISCUSSIONS

Unanswered
SUBJECT POSTED BY GROUP LAST ACTIVE REPLIES
Magnetic mud causing MWD surveys to fail QC Neil Bergstrom Directional Surveying 11 May 2021 12
Requirement for wiper trips subsequent to Wireline MDT pump out for fluid sampling Iain Whyte Deepwater specific 11 May 2021 8
Slip lock wellhead urgently required Dave Taylor - SPREAD Moderator Casing & Liners 11 May 2021 2
Well integirty testing in deepwater? Peter Aird Deepwater specific 11 May 2021 1
Effect of silicate mud on XC Reamer screens Dave Taylor - SPREAD Moderator Hole-openers and under-reamers 11 May 2021 2
Shearing expandable liner and inner running stirng. Peter Aird Well Control 11 May 2021 2
4.0" TIW valve Trung Chu Drilling Equipment 11 May 2021 3
Plunger vs. Flapper Float Valves Sam Yap Well Control 11 May 2021 7
Apply torque in string when jarring down ? Soren Hartmann Stuck-pipe 11 May 2021 5
Annular Pressure (9 5/8" x 7") ZIANI Said Drilling Operations 11 May 2021 11
Use of ROD (Ream on Demand) to drill-out 20" casing shoetrack Dave Taylor - SPREAD Moderator DWOP Comments 11 May 2021 11
Safety joints Wayne Nash Drill String Design 11 May 2021 12
Where to cut 9 5/8″ Casing Mike Fraser Abandonments (facilities and/or wells) 11 May 2021 9
Casing failure Thomas Emmons Casing & Liners 11 May 2021 12
drillers' depth Harald Bolt Cementing 11 May 2021 3
7″ Liner Cement Planning Ahmed Abdelhamid Cementing 11 May 2021 8
Searching for a low cost temperature sensor for shallow wells Iain Whyte Data Acquisition 11 May 2021 6
Experience with CTEMP from Pegasus Vertex? Yunchuan (Larry) Zhao HTHP 11 May 2021 0
Effect of oil base mud on PDC bits wear and Dull compared to water base mud Ahmed Abdelhamid Drilling Fluids 11 May 2021 9
Steve Devereux to join rp-squared team Dave Taylor - SPREAD Moderator RP-squared announcements 11 May 2021 5