DISCUSSIONS

Unanswered
SUBJECT POSTED BY GROUP LAST ACTIVE REPLIES
Ideas to improve efficiency - Bit protector for M/U bit to BHA in the yard Dave Taylor - SPREAD Moderator Drilling Equipment 11 May 2021 9
Pumping LCM and cement through drilling BHA. Chris Henderson Drilling Fluids 11 May 2021 9
Shutting in the well on a jack-up : Annular or Pipe Rams Dave Taylor - SPREAD Moderator HTHP 11 May 2021 9
Abandonment of MLS Well with Possible live 9 5/8/7" Annulus david deveney Drilling Operations 11 May 2021 9
Optimal Pilot hole size as water depth increases? Peter Aird Deepwater specific 11 May 2021 9
Stick -slip problem. Vinod Mahadik Drill String Design 11 May 2021 9
Effect of oil base mud on PDC bits wear and Dull compared to water base mud Ahmed Abdelhamid Drilling Fluids 11 May 2021 9
Where to cut 9 5/8″ Casing Mike Fraser Abandonments (facilities and/or wells) 11 May 2021 9
High connection gases during drilling but low pore pressures from wireine(post drilling). Chike Nwagu HTHP 11 May 2021 9
Platform Conductor Fatigue Study Ed Appleton Casing & Liners 11 May 2021 9
University Research into Training for the Offshore Drilling Industry Callum Christie Training and Competency 11 May 2021 9
With this down turn in our industry are multilaterals a useful well construction technique to reduce costs? Ken Horne. General discussions 01 July 2025 9
Shooting nipples Peter Aird Completion 11 May 2021 9
PS30 Slip Carrier Lost in Hole Myles Barrett General discussions 11 May 2021 9
Green cement pressure test with stinger cementation Claudio Virgilio Cementing 11 May 2021 9
Rig substructure loads Askhat Burlibayev Drilling Equipment 11 May 2021 9
Section Mill - Or - Perf, Wash & Squeeze? Jamie Stewart Abandonments (facilities and/or wells) 11 May 2021 9
Using Annular BOP for WL operations Askhat Burlibayev Well Control 11 May 2021 9
Milling of Weatherford DDV Umair Ahmed Baig Milling 11 May 2021 9
NPT and (K)ILT coding, definitions and guidance Dave Taylor - SPREAD Moderator Performance 11 May 2021 9