DISCUSSIONS

Unanswered
SUBJECT POSTED BY GROUP LAST ACTIVE REPLIES
Plunger vs. Flapper Float Valves Sam Yap Well Control 11 May 2021 7
Apply torque in string when jarring down ? Soren Hartmann Stuck-pipe 11 May 2021 5
Annular Pressure (9 5/8" x 7") ZIANI Said Drilling Operations 11 May 2021 11
Use of ROD (Ream on Demand) to drill-out 20" casing shoetrack Dave Taylor - SPREAD Moderator DWOP Comments 11 May 2021 11
Safety joints Wayne Nash Drill String Design 11 May 2021 12
Where to cut 9 5/8″ Casing Mike Fraser Abandonments (facilities and/or wells) 11 May 2021 9
Casing failure Thomas Emmons Casing & Liners 11 May 2021 12
drillers' depth Harald Bolt Cementing 11 May 2021 3
7″ Liner Cement Planning Ahmed Abdelhamid Cementing 11 May 2021 8
Searching for a low cost temperature sensor for shallow wells Iain Whyte Data Acquisition 11 May 2021 6
Experience with CTEMP from Pegasus Vertex? Yunchuan (Larry) Zhao HTHP 11 May 2021 0
Effect of oil base mud on PDC bits wear and Dull compared to water base mud Ahmed Abdelhamid Drilling Fluids 11 May 2021 9
Steve Devereux to join rp-squared team Dave Taylor - SPREAD Moderator RP-squared announcements 11 May 2021 5
Slide drilling through a closed annular Ryan Heng Deepwater specific 11 May 2021 4
Stick -slip problem. Vinod Mahadik Drill String Design 11 May 2021 9
Rigless Xmas Tree Installation Stephen Whitehead Completion 11 May 2021 5
Drilling fluids for casing drilling Chris Hargreaves Drilling Fluids 11 May 2021 7
Industry standard definition of NPT and ILT Dave Taylor - SPREAD Moderator Performance 11 May 2021 2
Basics of Fraccing Scott McNeil Drilling & Completion 11 May 2021 10
Logging with losses Dave Taylor - SPREAD Moderator Data Acquisition 11 May 2021 1